Fluid level controller (with 3 probes)
enlarge picture
| Power supply voltage | 230 V AC |
| The executive element | 2 × relay |
| Maximum load current | 2 × 16 A |
| Contact configuration | 2 × NO/NC |
| Separation of the contact | YES |
| Voltage of measuring outputs | 6 V |
| Type of flood probe | 3 x PZ2 |
| Switching delay for the MIN point | 1÷2 s |
| Delay of contact switching for the MAX point | max. 5 s |
| Probe clamps | separated from the transformer network |
| Terminal | pluggable terminal blocks 4,0 mm² |
| Tightening torque | 0,5 Nm |
| Power consumption | 1,1 W |
| Working temperature | -25 ÷ 50 °C |
| Dimensions | 3 modules (52,5 mm) |
| Assembly | on rail 35 mm |
| Ingress Protection Marking | IP20 |
